This function is used to change the type of controller function depending on the weekday. Up to four times can be parameterized per day. This results in up to four time intervals per day, whereby the last time interval lasts until time 1 of the next day. For example, if time 4 is adjusted no later than time 3, time 3 becomes the final time of the day and the interval lasts until time 1 of the following day.

The 7 days and 4 times create a total of up to 28 time windows or parameters in which you can configure how the controller is to behave.

The setpoint planner is a function of the controller that can be activated. The scheduler has a certain priority in this case. "Positioner", "External setpoint W3", "Setpoint W2" have a higher priority than the setpoint planner when the controller is operated by switch.