To transmit data via USB stick to the HMI, you need the following component: Transcend 16GB Jetflash 300 USB stick.

1. Start the seavis System Builder.

2. Activating edit mode

3. In the "Tools" menu, click on "Manage USB stick...". The following window opens:

   

   1. Selection of storage medium.

   2. List of all backups on the USB stick. The backups can be different:

      : A backup that includes a HMI program.

      : A backup that includes a HMI program. This backup was made installation-capable.

      : A backup that does not include a HMI program.

   3. Confirmation button for performing the previously specified actions.

   4. This button is used to mark the last selected backup for deletion.

   5. This button is used to make the last selected backup installation-capable.

   6. Updating the view.

Producing an Installation-Capable USB Stick

1. Select the USB stick in the selection (1).

2. In the selection (2), chose a backup that includes a HMI program. This is recognizable from the symbol .

3. Press the button (5). The symbol changes to .

4. Press the button (3). After a brief waiting time, a message appears indicating that an installable USB stick has been created.