-
HMI programm
If you wish to install the HMI program, set the check mark for (1).
Note
When installing or updating a HMI program, you should also always update the operating system (3)!
If you have opened a project file that already contains a HMI program, you cannot take any further action here. The HMI program is always installed from the project file. If you do not want to do this, start the installation wizard without first opening a project file.
Otherwise, the following view opens with one or more entries. Set the check mark beside the HMI program version that you wish to install.
Note
If you have more than one choice here and are unsure which to make, always choose the latest version.
-
Texts displayed on the HMI
If you have already set a check mark for "HMI program", this item is automatically activated. The texts can also be transmitted to a HMI without a HMI program. However, this must be done using the network.
Depending on the selected system, you will receive a choice of languages or not.
The German and English languages (1) are always installed. Up to two further languages can also be added.
-
HMI operating system
Operating systems can be installed exclusively using a USB stick. If you wish to install the operating system, set the check mark and a selection appears. Set the check mark beside the version that you wish to install.
-
Configurations
If you have opened a project file that contains configurations, you can set the check mark here. A selection of all configurations contained in the project file appears. Set check marks beside all configurations that you wish to transmit to the HMI.