×

Simultaneous firing: Air volume adjustment F2 to F1

Parameter

Description

Entering -50 to +50% corresponds to -500 to +500 as a parameter value.

Via the adaptation of the air flow rate you can adjust the different air requirements between the fuels in simultaneous firing. The adaptation of the air flow rate takes effect on the load setpoint of the air ducts (channel functions 2 and 4). The maximum adaptation of the air flow rate is calculated as a percentage from the topical load setpoint of the air ducts. The topical adaptation of the air flow rate is calculated from the maximum air adaptation according to the fuel ratio.

The adjusted values always refer to the fuel mentioned first in the parameter designation.

Properties

Type

Floating point

Min

-50

Max

+50

Unit

%

Reference

2124

DOC-729428903