..
Operation mode
Activate fuels
Load shut-off limit during burner stop
Channel selection for this operation mode
Burner direct start / direct stop
Start additional fuel as of load position
Stop additional fuel as of load position
Primary fuel
Load position MAX start secondary fuel
Load position MIN start secondary fuel
Low-load position fuel A [Digit]
Low-load position fuel B [Digit]
Pilot Burner Function
Operation mode selected
Parameter
Description
With this parameterization, you define the primary fuel for simultaneous firing. The primary fuel is responsible for the portion of the burner capacity according to the actuating signal of the mixture controller (0 to 100 %). The secondary fuel is responsible for the remaining burner capacity.
Fuel F1 is natural gas. Fuel F2 is biogas.
Biogas is to be mainly burnt, with natural gas only used to make up the shortfall in output. The primary fuel is "Fuel F2 biogas".
Properties
Selection parameter
Reference
1336, 1344; 1337, 1345; 1338, 1346; 1339, 1347; 1340, 1348; 1341, 1349; 1342, 1350; 1343, 1351
DOC-729015459
