..
Channel selection for this operation mode
C1: Used
C2: Used
C3: Used
C4: Used
C5: Used
C6: Used
C7: Used
C8: Used
C9: Used
C10: Used
C11: Used
C12: Used
HMI compound curve 1
HMI compound curve 2
Activate the channels that are to be used in an operation mode. This also applies to the channels outside of the compound (C8 to C12).
It is not possible to activate channels retroactively on the HMI in operation modes for which ignition and channel positions are already adjusted. If it is necessary to activate an additional channel in an operation mode, you must first delete the curve set for the operation mode concerned and then readjust the ignition and channel positions for all channels.
DOC-729012803
