Description

"Direction of travel on fault" is used to set the position for the channel the actuator is to be run to for as long as a safety shut-off is active.

Properties

Type

Selection parameter

[0] Off

The actuator follows the current position setpoint.

[1] Upper range limit

The actuator is run to the upper range limit.

[2] Lower range limit

The actuator is run to the lower range limit.

[3] Position setpoint

The actuator follows the current position setpoint.

[4] Ignition position

The actuator is run to the ignition position.

[5] Load-load position

The actuator is run to the low-load position.

[6] Special position

The actuator is run to the special position. The position is set on the HMI.

Reference

2131; 2159; 2187; 2215; 2243; 2271; 2299; 2327

DOC-720622575