Description

Defines whether, and if yes how, switching between local and remote operation can be performed. The following applies:

• The signals configured as "pushbutton" are impulses which must have a pulse duration of 3-5 seconds.

• The signals configured as "switch" are continuous signals.

• The same inputs are used for both the continuous signals and pulse signals, with the exception that only "activate remote operation" inputs are used for steady-state signals.

• The "activate local operation" inputs aren't read.

Properties

Type

Selection parameter

[0] Only local operation

[1] Remote operation only

[2] Switchover with HMI

[3] Switchover with HMI (pushbutton)

[4] Switchover with BUS (pushbutton)

[5] Switchover with HMI/DI (pushbutton)

[6] Switchover with HMI/BUS (pushbutton)

[7] Switchover with DI (switch)

[8] Switchover with BUS (switch)

Reference

4042

DOC-728817544