The raw value of a channel can be transmitted via BUS to the control and communication system (DCS).
Note
To receive signals from the control and communication system, select "DCS" in the "Master-ID" field when addressing the corresponding input channel.
-
Select the ON value in the "DCS Out" field.
-
Enter the address in the "DCS Word" and "DCS Bit" field.
A word has 16 bits. With "DCS Bit", 0..15 can be used to select the bit position in the word. A word can therefore contain 16 ON/OFF items of information.
-
⇨
The channel is now activated and addressed for the BUS system.