Activate channel
There is a large number of channels. Which if these are used depends on the plant configuration. If a channel is used, it must be switched on: Field "Channel ON" to "ON".
Channel addressing
Addressing is used to define the hardware or IO assembly from which the channel receives its value or where it writes it.
Many channels are already pre-addressed. However, you can also assign a different address to a channel at any time:
| Field |
Designation |
| Master-ID |
Source of the signal. |
| Node-ID |
Address (CAN node) to which the module on the CAN-BUS is connected (refer to the wiring diagram for details). |
| Value-ID |
Number of the input or output at the module. |