Description

Entering 0.0 to 120.0 seconds corresponds to 0 to 1200 as a parameter value.

Defines the signal settling time for the channel actual value.

Observe the following when configuring this parameter:

• The attenuation should preferably be set on the measured value recorder (e.g. revolutions counter).

• To switch on the attenuation, set the scan time to a value larger than zero.

• To increase the attenuation, increase the scan time.

• Do not set the scan time for the analog feedback values to a value larger than 1 s.

Properties

Type

Floating point

Min

0.0

Max

120.0

Unit

Seconds

[0] No attenuation

Reference

2148; 2176; 2204; 2232; 2260; 2288; 2316; 2344

DOC-720691399